CIMENTART SEALER is a coating ready to use whose formula is based on acrylic resins and water repellent additives and is water-based, which makes it perfect for the consolidation and sealing of the Microcement coatings.

· Acrylic sealer for cement, concrete, and wood surface   

· Increased cohesion over any porous surface

· Enhances the aesthetic finish of cement, concrete and microcement surfaces 

· Assists the application of the bi-component polyurethane varnish

 Its main characteristics are:  

· Complete waterproofing* of the surface.  

· It allows the respiration of the surface.

· It enhances the aesthetical finishing and the marble effects of the Microcement.  

· It makes easier the application of the CIMENTARTBI-COMPONENT POLYURETHANE.  

Once finished completely with the application of any of the CIMENTART Products (Microcement, Fine, or any of the Aqua products), including the sanding and cleaning processes, you would start applying the CIMENTART SEALER. It can also be applied in any cement or stamped concrete surface.  

· Apply directly with a varnish roller, a brush or an airless system, in an orderly way, a good layer without leaving excesses.   

· It should be applied over a clean, dry and dust-free surface.  

· The product is presented ready to use. We do not advise to dilute it.  

· Clean all tools with water.

With 1 liter of CIMENTART SEALER you can cover 7-10 m2 of surface, depending on the porosity of the surface itself. We recommend 1 layer for surfaces with no contact with water and 2 layers for surfaces with contact with water, like: shower plates, kitchen worktops and WC areas, exteriors surfaces, etc.)

· Recipients of 1 kg, 5 kg and 25 kg.  

· Big container of 1000 kg.

12 months, in a dry place protected from bad weather in its original recipient hermetically closed.